Say goodbye to burrs on wood and melting acrylic! Our high-performance carbide milling cutters, designed specifically for special materials such as wood and acrylic, use optimized blade design and precision manufacturing processes to ensure excellent cutting results and surface finish during processing. Whether you are doing precision cutting, fine engraving or efficient grooving, this series of milling cutters can help you easily obtain smooth and flawless cuts and clear and sharp edges.
[Core Features and Benefits]
Optimized for wood: The special blade geometry and helix angle design effectively reduce the tearing and edge collapse of wood fibers, and the edges of the processed wood boards are smooth and neat without too much post-processing.
Designed for acrylic: Some models (especially single-edge and specific double-edge) are highly polished to significantly reduce cutting friction and heat, effectively prevent acrylic from melting and sticking, and the cutting edge can present a crystal effect similar to polishing.
Efficient chip removal: The optimized spiral groove design provides sufficient chip removal space to ensure that the chips are discharged quickly and smoothly, avoid chip accumulation and secondary cutting, and ensure processing quality and efficiency.
Multiple flutes and spiral directions:
Single Flute: Especially recommended for high-speed cutting of acrylic and plastics, with large chip removal space, low cutting heat, and low sticking, suitable for obtaining high-finish surfaces.
Double Flute: Good versatility, suitable for processing wood and some acrylic, taking into account both cutting efficiency and surface quality.
Up-cut: Chips are discharged upward, which helps to clean the bottom of the groove, but may slightly lift the workpiece (need to be clamped).
Down-cut: Chips are pressed downward, which helps to compact the workpiece and reduce top edge collapse, suitable for processing veneers or thin boards.
Compression (some models): Combining the advantages of up-cut and down-cut, it is particularly suitable for processing laminates, OSB boards, etc., and good results can be obtained on both upper and lower edges.
High-quality carbide: Made of selected ultra-fine-grain carbide rods, it has excellent hardness, strength and wear resistance to ensure the durability of the tool.
Wide range of applications: Suitable for cutting, carving, grooving, milling and other processing of various wood boards (solid wood, MDF, particle board, plywood, etc.) and acrylic boards.
